PUR- CRETE Self-Leveling Cementitious Polyurethane
3 Part Self-leveling Cementitious Polyurethan (65 pounds total)
PUR-CLUM is a self-levelling, medium to heavy duty, three-components; water dispersed polyurethane-based cement and aggregate screed. It is designed to provide excellent resistance to abrasion, impact, and chemical attack. PUR-CLUM can be broadcast with quartz aggregate to increase surface texture and slip resistance. The system is typically installed at 3/16 to 1/4 in (4.5 to 6 mm) thickness
$199.00
Out of stock
PUR-CRETE is a self-levelling, medium to heavy duty, three-components; water dispersed polyurethane-based cement and aggregate screed. It is designed to provide excellent resistance to abrasion, impact, and chemical attack. PUR-CLUM can be broadcast with quartz aggregate to increase surface texture and slip resistance. The system is typically installed at 3/16 to 1/4 in (4.5 to 6 mm) thickness
ADVANTAGES
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
- Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
- Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from -40°F (-40°C) up to 248°F (120°C).
- Bond strength in excess of the tensile strength of concrete, concrete will fail first.
- Behaves plastically under impact; deforms but will not crack or debond.
- High abrasion qualities result from its pure silica aggregate structure.
- Highly resistant to fungi and mold growth.
WHERE TO USE
- PUR-CLUM floors are primarily used to protect concrete substrates. Typically used in food processing plants, wet & dry process areas, freezers & coolers, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, garages, warehouses and storage areas.
IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.
| Type Of Surface | Typical Coverage | Size of Area (sq ft) | Vital Coat Recommends You Buy | |
|---|---|---|---|---|
| Average Coverage | ||||
| Weight | 38 lbs |
|---|---|
| Dimensions | 18 × 6 × 6 in |
| Packaging | PART A (RESINE): 10.36 lbs (4.7 kg) |
| Color | UPART A: On request |
| Recommended Thickness | 1/4 in (6 mm) / (60 ft²/GAL) |
| Shelf Life | 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards. |
| Mix Ratio | Mix full units only |
| Pot Life | 20-25 minutes at 68ºF (20ºC) / 1/4 in (6 mm) |
| VOC (G/L) | 1.2 g/L |
Documents
 | PUR-CLUM TDS This PUR-CLUM TDS is in PDF format and requires the Adobe Acrobat viewer, or similar, to view. |
 | PUR-CLUM SDS PART A This PUR-CLUM SDS PART A is in PDF format and requires the Adobe Acrobat viewer, or similar, to view. |
| PUR-CLUM SDS PART B This PUR-CLUM SDS PART B is in PDF format and requires the Adobe Acrobat viewer, or similar, to view. |
| PUR-CLUM SDS PART C This PUR-CLUM SDS PART C is in PDF format and requires the Adobe Acrobat viewer, or similar, to view. |
WE SELL QUALITY
CONTACT Vital Coat
CONTACT US
2172 N Arendell Way
Tallahassee, Florida, 32308
Call Us
844-284-2858
E mail Us
info@vitalcoat.com
Menu
Shopping Cart