VITAL COAT VC-1200 MENDER CRACK REPAIR PART B – Vital Coat

VITAL COAT VC-1200 MENDER CRACK REPAIR PART B

THE BEST SOLUTION FOR A WIDE VARIETY OF RESIDENTIAL AND COMMERCIAL APPLICATIONS.

The Vital Coat V1200 Mender Kit is the best way to start out a project to provide the best results. It is best for filling cracks and spalls to create an even surface. Fast cure times with excellent adhesion and low viscosity allow for fast turnaround of coating projects or as standalone products.

Vital Coat’s VC-1200 Mender is a self leveling, high penetration, fast setting, repair system for virtually any type of concrete repair.  The product is a 1:1 ratio, easy to mix system that is 98% solids and VOC compliant. It can be used to set anchor bolts, repair damaged control joints, fill spalling, and rebuild vertical curbing and steps. Sand or gravel can be added to extend the volume of the material and acts as filler for repairing large spalls, holes and cracks.

Available in Extreme Heat, Summer, and Winter Series Environmental Installation Types.

 

$290.99

Vital Coat’s VC-1200 Mender EH (Part B Only) Floor & Crack Repair is part of a 2 component, fast setting polyurea designed for filling and repairing cracked and damaged concrete. It has a fast cure time with excellent adhesion and its’ low viscosity allows for fast turnaround of coating projects or as a standalone product. Silica sand, void of moisture, may be added to repair for deeper voids in concrete. Do not use on Concrete that has a high moisture content or a visible presence of water. Extreme Heat Series for use in summer temperatures. Vital Coat’s VC-1200 Mender EH Part B works with any VC-1200 series Part A Mender or Crack Repair products.

ADVANTAGES

  • Application temperature between 23°F to 100.4°F (-5°C to 38°C)
  • Product cures in 10 minutes @ 71.6°F (22°C) with excellent adhesion
  • Self-leveling and self-priming
  • Ready to grind in 10 to 20 minutes
  • Easy to mix 1:1 ratio by volume
  • Highly chemical resistant
  • Excellent for industrial floor repairs subject to forklift traffic and harsh conditions
  • Extreme Adhesion

WHERE TO USE

  • Crack Repair
  • Aircraft hangar floors
  • Spalling
  • Maintenance facility floors
  • Garage floors
  • Industrial shop floors
  • Car washes or wash bays
  • Forming/ rebuilding stairs and steps
  • Leveling and grade matching
  • Bridge/ street repairs
  • Concrete polishing and other coating applications
  • Non-moving control joint fill
  • Vertical Repairs

 

 

Reviews

There are no reviews yet.

Be the first to review “VITAL COAT VC-1200 MENDER CRACK REPAIR PART B”

Your email address will not be published.

Type Of Surface Typical Coverage Size of Area (sq ft) Vital Coat Recommends You Buy
Weight 45 lbs
Dimensions 12 × 12 × 15 in
Select Installation Environment

Extreme Heat Series

Component Part

Part A, Part B

Documents

Technical Data Sheet

This Technical Data Sheet is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

Safety Data Sheet Part A

This Safety Data Sheet Part A is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

Safety Data Sheet Part B

This Safety Data Sheet Part B is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

Shopping Cart
Scroll to Top