VITAL COAT VC-2215 EH TAN POLYUREA BASE COAT 15 GAL. KIT – Vital Coat

VITAL COAT VC-2215 EH TAN POLYUREA BASE COAT 15 GAL. KIT

Vital Coat VC-2200 Series Base Coats are a 100% solids polyurea base coat designed for use over properly prepared concrete, wood, and other various substrates. It has a fast cure time with excellent adhesion and its’ low viscosity allows for fast turnaround of coating projects. The Extreme Heat Blend is for use in summer high heat and high humidity temperatures.

Kit Includes: 15 Gals. Total

  • 2 – Five Gal. Pails of Part 1
  • 1 – Five Gal. Pail of Part 2

 

$1,129.13

VC-2200-EX Base Coat (Extreme Heat Series) is a slow curing, low odor, hybrid polyurea/polyurethane  coating system designed primarily for use under broadcast flakes or quarts for a quick turnaround. VC-2200-EX Base Coats allow for broadcast systems to become a one day install system. Our hybrid Base/Primer  exhibits very good appearance and chemical and physical properties. Vital Coat VC-2200 Extreme Heat Series Base Coats are a two-component (2A:1B), 100% solids Polyurea primer/basecoat. VC-2200 allows installers prepare large areas, including vertical surfaces, before broadcasting decorative vinyl chips, or flakes. The Extreme Heat Series provides longer “open time” which results in perfect broadcasts every time.

ADVANTAGES

  • Pre-Tinted Colors – Available in Grey or Tan.
  • Easy to mix 2:1 ratio by volume
  • Fast cure times allows for 1 day installations.
  • Highly chemical resistant
  • UV Stable
  • Flexible
  • Extreme Adhesion
  • Self Priming

WHERE TO USE

  • Garage Floors
  • Aircraft hangar floors
  • Warehouses
  • Maintenance facility floors
  • Heavy Traffic Areas
  • Industrial shop floors

 

Reviews

There are no reviews yet.

Be the first to review “VITAL COAT VC-2215 EH TAN POLYUREA BASE COAT 15 GAL. KIT”

Your email address will not be published. Required fields are marked *

Type Of Surface Typical Coverage Size of Area (sq ft) Vital Coat Recommends You Buy
Average Coverage Coverage is expressed in a range from 200 – 300 Sq. Ft. per gallon. The 300 Sq. Ft. number is rare and typically only used in cases where we are adding an extra coat. In general, we would figure coverage at 200 Sq. Ft. per gallon to be safe. Depending on the color being used, the number of coats and the amount of flake being used that number can sometimes be increased to 250 Sq. Ft. per gallon. Keep in mind full broadcast systems are much safer estimated at 200 Sq. Ft. per gallon and should NEVER exceed 250 sq. Ft. per gallon
Component Part

Part A, Part B

Color

Tan, Grey, Clear

Documents

Safety Data Sheet Part A - Grey

This Safety Data Sheet Part A - Grey is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

Safety Data Sheet Part A - Tan

This Safety Data Sheet Part A - Tan is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

Safety Data Sheet Part B - Clear

This Safety Data Sheet Part B - Clear is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

Technical Data Sheet

This Technical Data Sheet is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

Shopping Cart
Scroll to Top