DESCRIPTION
P-AU100 is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyester polyurethane finish coat. It is
available in clear gloss, clear satin and can be pigmented. It is VOC Compliant in all states and provinces in North America. It cures
to an inert, tough, impact, abrasionand chemical resistant finish coat. It is resistant to Skydrol, betadine and conventional hot-tire
staining. Excellent adhesion to PurEpoxy’s epoxy system. It requires a primer, Polyurethane-Acrylic Primer and Concrete Sealer,
when it is applied to properly prepared concrete and cementitious overlays. It is used as an upgraded finish coat on PurEpoxy
products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories
and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic,
fork lift traffic and chemical attack.
PRIMARY APPLICATIONS
- UV-stable top coat
- Aircraft hangar floors
- Production areas
- Maintenance facilities
- Warehouses
ADVANTAGES
- Long pot life
- Respectable odor
- Superior chemical resistance (compared to standard epoxy)
- Excellent chemical resistance
- Light stable and good gloss retention
- VOC complaint
TECHNICAL DATA
PACKAGING 1 US gal (4 L)
COVERAGE RATE 800 ft2/gallon
RECOMMENDED THICKNESS 3.2 wet mils (81 microns)
MIX RATIO, BY VOLUME A : B = 3 : 1 + 1lb aluminum oxide
DENSITY (KG/LITRE) Part A: 1.14 / Part B:0.90 / Mixed: 1.09
POT LIFE 60 minutes @ 77°F (25°C)
SHELF LIFE
12 months in original unopened factory sealed containers. Keep away
from extreme cold, heat, or moisture. Keep out of direct sunlight and
away from fire hazards.
WORKING TIME 30 minutes
VOC 75.4 g/L
* The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. *
* Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity.
