PE-VRM Epoxy Moisture Vapor Barrier - Vital Coat
Search
Close this search box.
Sale!

PE-VRM Epoxy Moisture Vapor Barrier

PUREPOXY

PE-VRM MOISTURE VAPOR BARRIER EPOXY

PE-VRM is a clear 2-component, 100% solids, low odor, low viscosity epoxy that is specifically formulated as a moisture barrier coating to treat new and existing concrete floors with high moisture and high pH. PE-VRM can be used as a one-coat moisture vapor barrier coating suitable for various types of concrete. The low viscosity formula not only promotes deeper concrete penetration for superior substrate adhesion, but also generates higher propensity for sealing and blocking moisture drive than standard epoxy flooring product.

Original price was: $259.00.Current price is: $169.99.

PE-VRM moisture vapor barrier epoxy is a clear 2-component, 100% solids, low odor, low viscosity epoxy that is specifically formulated as a moisture barrier coating to treat new and existing concrete floors with high moisture and high pH. PE-VRM can be used as a one-coat moisture vapor barrier coating suitable for various types of concrete. The low viscosity formula not only promotes deeper concrete penetration for superior substrate adhesion, but also generates higher propensity for sealing and blocking moisture drive than standard epoxy flooring product.

ADVANTAGES

  • 100% Solids, Low VOC, Low Odor
  • Vapor Control for High Moisture and High pH Slabs
  • One-Coating Moisture Vapor Barrier
  • Excellent Concrete Adhesion
  • Standard and Fast Drying Times
  • Low Viscosity for Deeper Concrete Slab Penetration
  • Controlled Vapor Pressure up to 25lbs

WHERE TO USE

  • Manufacturing & Warehouse Floors
  • Laboratories
  • Mechanical Rooms
  • Animal Care Areas
  • Shop Floors
  • Loading Docks
  • Pharmaceutical Plants
  • Retail Stores
  • Multiple-Unit Housing
  • Institution Facilities
  • Excellent Moisture Blocker
  • Underneath any Coatings Showing Concrete Contamination
  • Underneath Various Floorings Such as Carpet, Wood, Rubber, Vinyl, Tile, & Linoleum/PVT

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.

PE-VRM is a two part component system mixed at a 2:1 ratio. 2 Part A to 1 Part B. The available sizes are 1 gal kit ( 3 – 1 gallon pails) and 15 gal kit (3- 5 gallon pails)

Type Of Surface Typical Coverage Size of Area (sq ft) Vital Coat Recommends You Buy
Average Coverage
Weight 32 lbs
Dimensions 8 × 8 × 12 in
Packaging

1 gal & 5 gallons (2 Sized Kits)

Color

Clear

Shelf Life

Parts A and B: 12 months in original unopened factory sealed containers. Protect from freezing. Store dry between 50-110ºF (10-44ºC).

Mix Ratio, By Volume

2A : 1B = 2:1

Pot Life

35-40 minutes

VOC (G/L)

<5 g/l

APPLICATION TEMPERATURE

45ºF (7ºC) min. / 86ºF (30ºC) max.

SERVICE TEMPERATURE

-40ºF (-40ºC) min. / 248ºF (120ºC) max.

DENSITY

9.0 lb/ga

VISUAL APPEARANCE

High Gloss

CURING DETAILS

FOOT TRAFFIC: N/A
LIGHT TRAFFIC: N/A
FULL CURE: 7-8 days / 1/4 in (6 mm)

Documents

PE-VRM TDS

This PE-VRM TDS is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

PE-VRM Part A SDS

This PE-VRM Part A SDS is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

PE- VRM Part B SDS

This PE- VRM Part B SDS is in PDF format and requires the Adobe Acrobat viewer, or similar, to view.

Shopping Cart
Scroll to Top